Dear SCO Customer, The enclosed Support Level Supplement (SLS) PTF3322D, the I2O Mass Storage Drivers Supplement, supplies the required drivers to add I2O Mass Storage support to SCO UnixWare. Note: PTF3322D replaces PTF3322B and may be installed on systems already containing PTF3322B. PTF3322D provides the following enhancements: - It correctly recognizes and works with I2O devices that have a PCI expansion ROM. - It will install on SCO UnixWare 2.1.3 systems. - It includes a number of small fixes involving message sizes. Note: This supplement provides support for Mass Storage Devices on an I2O subsystem, after the initial system has been loaded on non-I2O SCSI or IDE hard drive subsystems. SLS PTF3322D does _not_ allow the operating system to be loaded onto a subsystem using I2O, nor does it provide LAN support. This supplement conforms to devices specified in the I2O 1.5 specification which is available from the I2O Special Interest Group at: http://www.i2osig.org Software Notes and Recommendations ---------------------------------- PTF3322D should only be installed on these releases: SCO UnixWare Application Server Release 2.1.0, 2.1.1, 2.1.2, 2.1.3 SCO UnixWare Personal Edition Release 2.1.0, 2.1.1, 2.1.2, 2.1.3 PTF3322D replaces PTF3322B and may be installed on systems already containing PTF3322B. Installation Instructions ------------------------- 1. Download the ptf3322d.Z and ptf3322d.txt files to the /tmp directory on your machine. 2. As root, uncompress the file and add the package to your system using these commands: $ su # uncompress /tmp/ptf3322d.Z # pkgadd -d /tmp/ptf3322d 3. Reboot the system after installing this SLS. Removal Instructions --------------------- 1. As root, remove the package using these commands: $ su # pkgrm ptf3322d 2. Reboot the system after removing this SLS. If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier. We appreciate your business. SCO Support Services