What is the SCO OpenServer Release 5.0.7 Large Filesystem Performance Supplement and where can I download it? KEYWORDS: sco openserver 5.0.7 large filesystem performance supplement lfps htfs dtfs RELEASE: SCO OpenServer 5.0.7 PROBLEM: What is SCO OpenServer Release 5.0.7 Large Filesystem Performance Supplement and where can I download it? SOLUTION: This supplement provides several updates that improve the performance of large filesystems. Specifically, this supplement includes: --------------------------------------------------------------------------- NOTE: To Large Filesystem Performance Supplement version 1.1.0a customers: Version 1.1.0c of the Large Filesystem Performance Supplement (LFPS) fixes serious packaging problems that existed in the initial release (version 1.1.0a) of the supplement. If you are currently using the LFPS version 1.1.0a, *DO NOT* attempt to discover and fix these problems in the *Software Manager* by running *Software*-->*Software Manager*-->*Fix Discrepancies*, as you will lose access to the *fsck*(ADM) and *mkfs*(ADM) binaries for the HTFS and DTFS filesystems. To fix these problems, 1.1.0a customers should install the Large Filesystem Performance Supplement version 1.1.0c. For your convenience, you do not need to remove version 1.1.0a of the supplement before installing the updated LFPS. --------------------------------------------------------------------------- * an updated HTFS driver that improves file creation performance on HTFS filesystems. Performance gains are more appreciable on large (greater than 50GB) filesystems, especially when the filesystem is over half full. * an updated fsck(ADM) binary that minimizes downtime while an HTFS filesystem is ``cleaned'' after an abnormal system shutdown. This new version of fsck fixes a problem where ``fast fsck'' failed on filesystems larger than 100GB, requiring that a full filesystem check always be run. A ``fast fsck'' generally lasts less than a minute, while a full filesystem check can take a number of minutes to several hours, depending on your system. * updated mkfs(ADM) binaries for HTFS and DTFS that are now able to determine the size of devices larger than 204GB. This supplement is supported on the following platforms: * SCO OpenServer Release 5.0.7 plus Maintenance Packs/Update Packs * SCO OpenServer Release 5.0.7 To install the Large Filesystem Performance Supplement: 1. Log in as root. 2. Download the Large Filesystem Performance Supplement from either the SCO web site or using FTP: + to use the SCO web site, go to the SCO Update Service and Supplemental Downloads web page for SCO OpenServer Release 5.0.7: http://www.sco.com/support/update/download/osr507list.html + to use FTP, go to the SCO Support Download Area: ftp://ftp.sco.com/pub/openserver5/507/lfps 3. Start the Software Manager by double-clicking on its icon on the desktop, or by entering the following at the command-line prompt: scoadmin software 4. From the Software menu, select Install New. 5. When prompted for the host (machine), select the current host and then click on Continue. 6. Select Media Images as the Media Device, then click on Continue. (You may need to scroll down before you see the Media Images option.) 7. Enter the absolute pathname for the directory that contains the Large Filesystem Performance Supplement media image. For example: /tmp/lgfsupp Click on OK. 8. In the Install Selection window, make sure that the Large Filesystem Performance Supplement is highlighted then click on Install. 9. When the installation is complete, click on OK. The Software Manager lists the supplement among the installed software. 10. Exit the Software Manager by selecting the Host menu, then Exit. 11. Reboot the machine, if required. If the Software Manager relinks the kernel during the installation, you must reboot before the new kernel takes effect.