OpenServer 5.0.7V Version 2.0.0 for VMware
	Build Notes for Open Source Source Code Distributions

-------------------------------------------------------
I. List of Open Source Packages for OpenServer 5.0.7V Version 2.0.0 for VMware

Listed below is the source code distribution of the new open source packages
that are included in the OpenServer 5.0.7V product.

 Source Code Package
 -------------------------------------------------------
 vmtools-2010.03.20-243334-OSR507V-src.tar.gz

 The VMware Tools for OpenServer 5.0.7V source distribution archive
 vmtools-2010.03.20-243334-OSR507V-src.tar.gz contains the source,
 patches, scripts, and instructions for rebuilding the VMware Tools for
 OpenServer 5.0.7V as well as the necessary open source dependencies.

-------------------------------------------------------
II. Software Notes and Build Instructions 

1.  See the individual README and top-level files inside the archive
    as well as the cover letter for the OpenServer 5.0.7V Build
    Supplement for VMware Tools:
	vmtools/README
	vmtools/vols/osr5/P535493B/p535493b.txt

2.  This source archive includes open source source for these components:

	open-vm-tools - VMware Tools
	libdnet - low-level network interface library
	pth - GNU Portable Threads
	skglib - threaded glib
	uriparser - RFC 3986 compliant URI parsing library
	netkit-rpc - basic network tools, including rpcgen,
		used in the VMware Tools build on OpenServer 5.0.7V

    These components are intended to be used together on an OpenServer 5.0.7V
    system and only for enabling/running the VMware Tools. More general uses
    of the other packages is not supported.

3.  The source archive also includes this patch:
	P535493B, OpenServer 5.0.7V Build Supplement for VMware Tools

    P535493B provides patches to header files needed to build the open source
    packages listed in #1.

    If you have previously added P535493A distributed at OpenServer 5.0.7V
    Version 1.0.0 release time, you should remove the P535493A patch before
    adding this updated header file patch.

    You should add P535493B to your OpenServer 5.0.7V system before building
    the libdnet, pth, skglib, uriparser, and/or vmtools components.  You
    should remove the P535493B patch before adding any additional
    OpenServer 5.0.7V updates.

4.  Extraction

    To extract the VMware Tools for OpenServer 5.0.7V source distribution,
    execute the following command:

    # gzcat vmtools-2010.03.20-243334-OSR507V-src.tar.gz | tar xf -

    Afer successful extraction of the source archive, see the file 
    vmtools/README for further information on the contents of the archive,
    build requirements, the recompilation process, and references.

---------------------------------------------------------
© Copyright 2010 The SCO Group, Inc.  All rights reserved.