What is Support Level Supplement (SLS) ptf9053, the UnixWare Australia Timezone Update?


Problem Fixed
-------------

  Updated timezone files to cater for the following:

  Usually most Australian timezones switch from DST in the last week
  in March. But because of the Commonwealth Games the switch in 2006
  is put off by a week for those territories that observe DST.

  For more information see:

  http://www.statoids.com/tau.html


Contents
--------

  /etc/TZ/Australia/Broken-Hill
  /etc/TZ/Australia/Broken_Hill
  /etc/TZ/Australia/Currie
  /etc/TZ/Australia/LHI
  /etc/TZ/Australia/Lindeman
  /etc/TZ/Australia/NSW
  /etc/TZ/Australia/North
  /etc/TZ/Australia/Queensland
  /etc/TZ/Australia/South
  /etc/TZ/Australia/Tasmania
  /etc/TZ/Australia/Victoria
  /etc/TZ/Australia/West
  /etc/TZ/australasia


Software Notes and Recommendations
----------------------------------

  ptf9053 should only be installed on:

  UnixWare 7.1.4


Installation Instructions
-------------------------

  1. Download the ptf9053.image file to the /tmp directory on your machine.

  2. As root, add the package to your system using these commands:

     $ su -
     Password: <type your root password>
     # pkgadd -d /tmp/ptf9053.image

     Alternatively, this package may be installed in quiet mode, that is,
     without displaying the release notes and asking for confirmation.
     To do this, use these commands:

     $ su -
     Password: <type your root password>
     # pkgadd -qd /tmp/ptf9053.image all

  3. There is no need to reboot the system after installing this package.
     However, if your system is running any libraries or commands that are
     contained in this package, then these programs will continue to run
     with the old versions of these libraries or commands until the system
     is rebooted.

     Note that when all necessary patches have been installed, it is good
     practice to reboot the system at the earliest opportunity.  This will
     ensure that no programs continue to run with the old libraries or
     commands.


Removal Instructions
--------------------

  1. As root, remove the package using these commands:

     $ su -
     Password: <type your root password>
     # pkgrm ptf9053

  2. Reboot the system after removing this package.

  If you have questions regarding this supplement, or the product on
  which it is installed, please contact your software supplier.