Dear Caldera Customer, 
 
Support Level Supplement (SLS) ptf7619d, the UnixWare 7.1.1 psm_apic Driver 
Supplement and NSC 7.1.1+IP dependent node install supplement, addresses the 
following problems: 

1. Installation of UnixWare 7.1.1 hangs on systems with a clock speed greater 
   than or equal to 1Ghz.

2. Support for UnixWare Non-Stop Clusters dependent node installation using the
   new Intel PRO/1000 F and PRO/1000 T Server Adapters.

3. Support for network installation of Unixware 7.1.1 using PRO/1000 Adapters.
 
 
Contents 
-------- 
 
   ptf7619d.boot1.img      boot floppy 1 image
   ptf7619d.boot2.img      boot floppy 2 image
   ptf7619d.netinst1.img   netinstall floppy 1 image
   ptf7619d.netinst2.img   netinstall floppy 2 image
   sumrs                   sum -r checksums
   ptf7619d.supp.image     Supplement floppy image
 
 
Installation Instructions 
------------------------- 
 
1. For supporting systems with 1GHz or greater clock speed, new boot floppies
   are provided. 

   Cut the boot floppies and a Supplemental floppy:

      # dd if=ptf7619d.boot1.img of=/dev/rdsk/f03ht bs=32k
      # dd if=ptf7619d.boot2.img of=/dev/rdsk/f03ht bs=32k
      # dd if=ptf7619d.supp.image of=/dev/rdsk/f03ht bs=32k
        (This is the Supplemental floppy.)

   Use the boot floppies to install the system.  Near the end of the 
   installation, you will be prompted for a PTF floppy.  At this point
   insert the Supplementary diskette in the floppy drive and choose
   "Install A PTF".

   Note that ptf7619d itself is not applicable and cannot be installed on
   NSC systems.  The 1Ghz support does not apply for NSC systems. 
 
2. For support of UnixWare Non-Stop Clusters dependent node installation
   using the the new Intel PRO/1000 F and PRO/1000 T Server Adapters, 
   new boot and netinstall images are provided.  Please see the file 
   README.ptf7619d for details. 
 
3. For updated support of network installation of Unixware 7.1.1 using 
   PRO/1000 Adapters, new netinstall floppies are provided.  Please see 
   the file README.ptf7619d for details. 
 

If you have questions regarding this SLS, or the product on which it is 
installed, please contact your software supplier.