Dear Customer, 
           
          Support Level Supplement (SLS) ptf7720a, the ARCserveIT 
          Server Supplement for PTF7141b, addresses the following problems 
           
           
          Problem Fixed 
          ------------- 
           
          	- ARCserveIT 6.6 cannot see files larger than 2 GB 
                  (erg712208/fz526357) 
          	- Database corruption when merging tape for restore 
                  (erg711622/fz515928) 
          	- ARCserve jobs fail to execute at the correct time 
                  (erg712232/fz525834) 
           
           
          Contents 
          -------- 
           
          	/opt/ARCserveIT/lib/libasdb.so 
          	/opt/ARCserveIT/lib/libaslog.so 
          	/opt/ARCserveIT/lib/libasrwtool.so 
          	/opt/ARCserveIT/newdbase/FTS/fts.dbd 
          	/opt/ARCserveIT/newdbase/MPOOL/mpool.dbd 
          	/opt/ARCserveIT/newdbase/QUERY/db_query.dbd 
          	/opt/ARCserveIT/newdbase/SETUP/setup.dbd 
          	/opt/ARCserveIT/newdbase/closefds 
          	/opt/ARCserveIT/newdbase/dbcheck 
          	/opt/ARCserveIT/newdbase/initdb 
          	/opt/ARCserveIT/newdbase/keybuild 
          	/opt/ARCserveIT/sbin/aprocess 
          	/opt/ARCserveIT/sbin/asdbd 
           
           
          Software Notes and Recommendations 
          ---------------------------------- 
           
          ptf7720a should only be installed on: 
           
          	UnixWare 7.1.1 
           
            IMPORTANT NOTE:  For this supplement to be completely effective, it 
            is essential that ALL UNIXWARE ARCserveIT CLIENT SYSTEMS OF 
            THIS SERVER HAVE THE ARCserveIT CLIENT AGENT SUPPLEMENT (PTF7721a) 
            INSTALLED.  This applies to this system, if it acts as an  
            ARCserveIT client, as well as to remote systems. 
           
            If your system is running any libraries or commands that are 
            contained in this SLS, then these programs will continue to run 
            with the old versions of these libraries or commands until the 
            the system is rebooted. 
           
            Note that when all necessary patches have been installed, it is 
            good practice to reboot the system at the earliest opportunity. 
            This will ensure that no programs continue to run with the old 
            libraries or commands. 
             
          Installation Instructions 
          ------------------------- 
           
          1. Download the ptf7720a.Z file to the /tmp directory on 
          your machine. 
           
          2. Stop ARCserveIT with the following command: 
           
          	# /usr/sbin/astop 
           
          3. As root, uncompress the file and add the package to 
          your system using these commands: 
           
          	$ su 
          	Password: <type your root password> 
          	# uncompress /tmp/ptf7720a.Z 
          	# pkgadd -d /tmp/ptf7720a 
          	# rm /tmp/ptf7720a 
           
          Alternatively, this SLS package may be installed in quiet 
          mode, that is, without displaying the release notes and asking 
          for confirmation.  To do this, use these commands: 
           
          	$ su 
          	Password: <type your root password> 
          	# uncompress /tmp/ptf7720a.Z 
          	# pkgadd -qd /tmp/ptf7720a all 
          	# rm /tmp/ptf7720a 
           
          4. Reinitialize the ARCserveIT database with the following 
          command: 
           
          	# /opt/ARCserveIT/bin/dbase_setup 
           
          	Answer "y" to the 2 questions you are asked: 
           
          	    Database already exists! 
          	    Do you want to re-initialize it? (default: n) [y,n,?,q] y 
           
          	    You've chosen to re-initialize the database. 
          	    This will destroy all the data in the database. 
          	    Are you sure? (default: n) [y,n,?,q] y 
           
             NOTE: This will remove all of the information from the ARCserveIT  
             database.  If there is a need to restore file(s) from any previous 
             backups, you will need to either "scan" the relevant backup tape 
             with the ARCserveIT Scan Manager or "merge" the backup tape into 
             the database with the ARCserveIT Merge Manager.  See the SCOhelp 
             ARCserveIT document for information on using these managers. 
           
           
          5. Restart ARCserveIT with the following command: 
           
          	# /usr/sbin/astart 
           
          6. There is no need to reboot the system after installing 
          this package. 
           
           
          Removal Instructions 
          -------------------- 
           
          1. As root, remove the package using these commands: 
           
          	$ su 
          	Password: <type your root password> 
          	# pkgrm ptf7720 
           
          2. There is no need to reboot the system after removing 
          this package. 
           
           
          If you have questions regarding this supplement, or the 
          product on which it is installed, please contact your software 
          supplier.