What is Support Level Supplement (SLS) ptf9100, the UnixWare 7.1.4+ Supplement?


Problem Fixed
-------------

  Fixes provided in ptf9100:

  1. Setting the boot parameter ACPI=Y actually causes the system
     to behave as if ACPI=N.  This has been fixed.
     fz536068

  2. Fix errors in the retrieval and interpretation of device configuration
     information from ACPI tables.
     fz536069

  3. Fix errors seen when configuring the network with netcfg or
     scoadmin network.
     fz536076

Contents
--------

  /etc/conf/pack.d/acpi/Driver_atup.o
  /etc/conf/pack.d/acpi/Driver_mp.o
  /etc/conf/pack.d/mps/Driver_mp.o
  /usr/sbin/netcfg


Software Notes and Recommendations
----------------------------------

  ptf9100 should only be installed on:

  UnixWare 7.1.4+

  As noted above in item 1 in the list of fixes, installing this patch
  will change the behavior of ACPI=Y.  If you have ACPI=Y specified in
  your system's /stand/boot file, it is recommended that before installing
  the patch, you change it to ACPI=N and also reboot the system to confirm
  that the system operates correctly once that change is made.

  Also, as noted in item 2 in the list of fixes, installing this patch
  fixes some problems in the interpretation of ACPI tables.  It's therefore
  possible that after installation of this patch, a system that previously
  required the ACPI boot parameter to be set may no longer need that setting.
  Some experimentation may be needed to determine whether this is the case.

Installation Instructions
-------------------------

  1. Download the ptf9100.image file to the /tmp directory on your machine.

  2. As root, add the package to your system using these commands:

     $ su -
     Password: <type your root password>
     # pkgadd -d /tmp/ptf9100.image

     Alternatively, this package may be installed in quiet mode, that is,
     without displaying the release notes and asking for confirmation.
     To do this, use these commands:

     $ su -
     Password: <type your root password>
     # pkgadd -qd /tmp/ptf9100.image all

  3. Reboot the system after installing this package.


Removal Instructions
--------------------

  1. As root, remove the package using these commands:

     $ su -
     Password: <type your root password>
     # pkgrm ptf9100

  2. Reboot the system after removing this package.

  If you have questions regarding this supplement, or the product on
  which it is installed, please contact your software supplier.